Flying Toekicks™ Model 30
Flying Toekicks™ Model 30 - For toe kick set-backs measuring 2-5/8” (67 mm) to 3-5/16” (84 mm).
Note - One Flying Toekicks™ device is for One Cabinet Door with One Attached Toe Kick Plate.
You will need Two (2) Flying Toekicks™ devices if you are outfitting a cabinet with Two Doors and Two Attached Toe Kick Plates.
Flying Toekicks™ Brand Attached Toe Kick System Hardware, U.S. Pat. No. 10190346
Flying Toekicks™ Model 30 – for toe kick set-backs measuring 2-5/8” (67 mm) to 3-5/16” (84 mm).
DEFINTION OF SET-BACK DISTANCE – Set-back is measured from the BACK of the cabinet door to the FACE of the toe kick plate and assumes a toe kick plate thickness of approximately ¾”. For toe kick plates which are not ¾” thick, the upper and lower range numbers will vary accordingly. Please refer to the set-back table for more information.
Application - Ordering one (1) Flying Toekicks™ device is for one door with one toe kick. If you are outfitting a cabinet with two doors and two toe kicks, you will need to order two (2) Flying Toekicks™ devices.
What's Included? - Each Flying Toekicks™ device includes (4) 5mm x 9/16" phillips-drive varianta screws and (2) #8x5/8" phillips-drive pan-head screws.